First, the main features
1, packing: Toner
2, a solid content (WT%) 30-40
3, a density (g / cm3) 1.0-1.3
4, the viscosity (CPS) 13,000-30,000 (rotational viscometer, Ⅱ units, 75rpm, 25 ℃)
5, the coating area (cm2 / g) (depending on the film thickness) 100-200
6, square resistance (Ω / □ / 25.4цm) 0.5KΩ-1MΩ
7, adhesion (3M600 tape, vertical pull) with no loss
8, hardness> H
9, flexibility (wire width 1mm, 2 公斤 × 180 ° outer flap × 1 分钟 × 10 times) △ R <20% R
10. Long-term working temperature (℃) <70
Second, the use
1, the substrate PET;
2, 200-300 mesh stainless steel screen mesh or polyester screen printing;
3, diluent JX special carbon slurry dilution dilution, should be fully mixed before use;
4, the curing process (recommended) 120 ℃ × 15 min;
5, cleaning agents cyclohexanone;
6, the storage room temperature storage, unopened storage period at six months or more;
7, packaging 1.00 kg (or according to requirements)
Third, the operation and safety
CCI-305JH conductive carbon paste containing organic solvents, should be used to maintain ventilation to avoid excessive internal steam inhalation: In case of contact with the skin, should be cleaned with water and soap.

CCI-305JH conductive carbon paste Senndai Electronic Materials Co., Ltd. is a fast-drying temperature curing high-impedance conductive carbon paste. It is cured thermoplastic resin refinements made by the ultra-fine toner and low temperature, suitable for screen printing. It can be used in place of electronic components, high-resistance carbon paste, used on PET, PVC sheet, with good printability, compatibility, hardness and strong adhesion.